Search
Filters

Gerbing 12V 9000mAh Portable Battery Pack

Gerbing 12V 9000mAh Portable Battery Pack

Availability: In stock
SKU: G1220U-BAT-861-001-10001
$159.99

This Gerbing 12V Battery Pack allows you to use your heated clothing while not hard-wired into your motorcycle. Great for short rides or using your Gerbing Heated Jacket or Vest while doing any cold-weather activity.

• 12v Lithium-ion 9Ah (9,000 mAh) Rechargeable Battery Pack
• Remote Control with 3 Heat Settings
• Wall Charger
• Detailed Instructions & Warranty
• Over 1 Hour of Heat for Gerbing Jacket Liners

• Dimensions: 6 1/2" x 3 1/4" x 1" and Weight 1lb

 

Instructions for programming a new remote with battery:

1. When the battery is not connected (to load or charger), Push the ON and OFF button on battery at the same time, the battery LED shall read A in flashing (means "address" searching),

2. Then push the OFF button on the remote, the flashing A in the LED display shall be OFF.

To Test that the battery and remote are paired. There are two ways:

1. Push the remote button OFF within 60seconds after the pairing procedure, the LED on the battery shall read "F" (means "find or found").

2. Confirm the remote is programmed by plugging in an article of Gerbing 12v gear and push any button on the remote.

This Gerbing 12V Battery Pack allows you to use your heated clothing while not hard-wired into your motorcycle. Great for short rides or using your Gerbing Heated Jacket or Vest while doing any cold-weather activity.

• 12v Lithium-ion 9Ah (9,000 mAh) Rechargeable Battery Pack
• Remote Control with 3 Heat Settings
• Wall Charger
• Detailed Instructions & Warranty
• Over 1 Hour of Heat for Gerbing Jacket Liners

• Dimensions: 6 1/2" x 3 1/4" x 1" and Weight 1lb

 

Instructions for programming a new remote with battery:

1. When the battery is not connected (to load or charger), Push the ON and OFF button on battery at the same time, the battery LED shall read A in flashing (means "address" searching),

2. Then push the OFF button on the remote, the flashing A in the LED display shall be OFF.

To Test that the battery and remote are paired. There are two ways:

1. Push the remote button OFF within 60seconds after the pairing procedure, the LED on the battery shall read "F" (means "find or found").

2. Confirm the remote is programmed by plugging in an article of Gerbing 12v gear and push any button on the remote.

Size Chart 12V Moto

 

TO MEASURE
Sleeve Length: Measure from center back to wrist with arms in the riding position
Waist: Measure around the fullest point of your natural waist
Chest: Measure under arms around the fullest part of the chest. Be sure to keep tape level across back and comfortably loose
Outseam: Measure along the outer leg from waist to floor, with riding footwear on
Tip: Best to have someone else measure you

Keep in mind that a number of factors need to be considered to assure a proper fit.
One being your primary riding position; measure according to your motorcycle style

 

Socks and Gloves

 

Download Size Chart

Size Chart 12V Moto

 

TO MEASURE
Sleeve Length: Measure from center back to wrist with arms in the riding position
Waist: Measure around the fullest point of your natural waist
Chest: Measure under arms around the fullest part of the chest. Be sure to keep tape level across back and comfortably loose
Outseam: Measure along the outer leg from waist to floor, with riding footwear on
Tip: Best to have someone else measure you

Keep in mind that a number of factors need to be considered to assure a proper fit.
One being your primary riding position; measure according to your motorcycle style

 

Socks and Gloves

 

Download Size Chart